Automatic 4-Pallet Pool for VMC
This series is for the Continental United States only. For International CE series Click Here
Whether running high volume production of the same part or programming several different set-ups, MIDACO's Automatic 4-Pallet Pool will extend operator walk-away time and maximize productivity on your new or existing vertical mill with 4 pallets on 1 shuttle. Save money by increasing spindle utilization during the machining process and quote more competitively. See Brochure PDF
ONE Shuttle + FOUR Pallets = QUADRUPLE the Walk-Away Time
Full 360 degree rotation of the shuttle's pallet carrousel.
Once a job cycle is complete, pallets will rotate automatically on the shuttle carrousel, ready and scheduled to feed your VMC for multiple hours of unattended machining.
Durable precision ground steel rails and hardened locating pins/bushings assure +/- 0.0001” (0.0025mm) repeatability.
The shuttle's servo drive transfers the next pallet onto the cast iron receiver mounted directly onto the machining center table with +/- 0.0001” (0.0025mm) repeatability.
Specifications:
- 1- servo drive shuttle system with automatic door and light curtain.
- 4 - cast aluminum or cast iron pallets, sizes 40" x 19" (1060mmx482.6mm) up to 40” x 24” (1060mm x 609.6mm).
- 1 - cast iron pneumatic receiver with 1000 lb (454 kg) capacity with weight evenly distributed on pallet. {optional 2000 lb (908 kg) capacity is also available}
- Control panel is fully integrated with the VMC via M-codes.
With 2-sided guarding via a light emitter, mirrors and sensors, a pallet change will not occur if the invisible light beams surrounding the shuttle system are breached.
MIDACO's Automatic 4-Pallet Pool is also available as a Dual System with one shuttle mounted on each side of the VMC, supplying a total of 8 pallets.
For more information
Call or complete our online contact form today.