Quote
(847) 558-6720
Toll Free (855) 593-5668

“We have a Midaco Robot (Loader) and use it as a ‘pick and place’. The ‘pick and place’ is simply grabbing these slugs and placing them into a 5-axis rotary table. In the 5-axis rotary table, once the parts are finished, they are removed from the 5 Axis rotary table and placed in the original po...

Read More

“Here we have a third pallet that we run in a VF-2 (Haas), and we have a Manual Pallet Changer where we run two pallets during the day and we run two shifts total. At the end of the second shift they throw this pallet in there. We utilize our lights out time and this pallet runs for about two ho...

Read More

“We built this facility in 2004 and have out grown it already. The beautiful thing about this machine with the pallet changer is we can put two DM-1’s with Midaco pallet changers in the place of one of our VF-4’s and get twice the production out of these two machines face to face. That’s the gre...

Read More

In search of cost-effective productivity improvements, Landis Machine Shop President Mark Lewkowicz looks for small, inexpensive measures to upgrade the equipment he already owns. Recently, he upgraded an upgrade. An automatic pallet changer had been added to a vertical machining center to reduc...

Read More

If you’re contracted to deliver large quantities of identical components for a very well-known name in the earthmoving vehicle sector, you’d better make sure you have a fast, reliable, and repeatable manufacturing setup. National Technologies Inc. makes precision parts for Caterpillar using a fleet...

Read More

Seeking a less-expensive VMC, K&G Manufacturing decided on a package consisting of a VF3SSYT VMC from Haas Automation (Oxnard, California) and a A4025SD APC with cast-aluminum pallets from Midaco (Elk Grove Village, Illinois). Since installation, the system has been used to run both low- and...

Read More

Neely Precision Uses Pallet Changer To Stay Competitive. "After we installed it, and after tweaking the tooling and the pallet changer fixtures, our output shot up from three-and-a-half to four parts the old way, to nearly six parts the new way. So instead, the MIDACO pallet system increased our pro...

Read More

We are a job shop in Kent, Washington, with 9 Mori Seiki Machines. Being in business for over 30 years producing parts for the aerospace, computer, medical and commercial industries, productivity and reliable turnaround are critical to our business. Eight years ago we needed to increase our producti...

Read More

Clipper Industries in Itasca, Illinois adds a MIDACO A6040SD Pallet System and HAAS VF8 Machining Center, reducing their cost per part 30-50%, and slashing process lead-time over 75% from 3-4 weeks down to 3-4 days. "The fact that the system automatically exchanges pallets in less than 30 seconds wi...

Read More

“We really like how simple the Midaco is to use. We also like that it can be mounted on the left, right or even both sides of some CNC machines. There is no interference for the operator, and that really helps us change parts fast. When one pallet of parts is complete, an operator can remove the...

Read More

Midaco Corporation Reviews

The Midaco Pallet changer has helped ramp up production in many benefits. While the machine is running a set of parts, the operator is capable to safely secure another set, eliminating downtime on the CNC. Excellent product


Affordable Automation

Increase your new or existing machine tool’s productivity and get more parts out the door with MIDACO.

Request a Quote Today